Differences

This shows you the differences between two versions of the page.

--- arduino:pa_328d:burning_the_bootloader [2018/09/08 21:09] – [Burning the bootloader] mithat
+++ arduino:pa_328d:burning_the_bootloader [2018/09/08 21:11] (current) – [Burning the Arduino bootloader with PA-328d] mithat
@@ Line 4: / Line 4: @@
 You'll need:
   * A 5V USBtiny-compatible AVR programmer similar to [[https://www.ebay.com/itm/USBTiny-USBtinyISP-AVR-ISP-programmer-for-Arduino-bootloader-Meag2560-uno-r3/222309741667?epid=2133920222&hash=item33c2b17463:g:z2gAAOSwo4pYI0WC|this one]]. The [[https://www.adafruit.com/product/46|Adafruit USBtiny]] should work too but isn't tested.
-  * A tabbed 6-pin IDC cable (typically packaged with the USBtiny-compatible board).
+  * A tabbed 6-pin IDC cable. One typically comes packaged with the USBtiny-compatible board.
   * A populated [[https://gitlab.com/mithat/Arduino-programming-board|PA-328d]] PCB.
   * One or more ATMEGA328P-PU ICs that you want to burn the Arduino bootloader onto.
@@ Line 28: / Line 28: @@
 ===== Burning the bootloader =====
-Plug the USBtiny in to your computer via USB. Then for each ATMEGA328P-PU you want to burn the bootloader onto:
+Plug the USBtiny compatible in to your computer via USB. Then for each ATMEGA328P-PU you want to burn the bootloader onto:
   - Insert the ATMEGA328P-PU into the ZIF socket and lock the latch.