arduino:displays_for_classic_arduinos:nokia_5110_displays_and_classic_arduinos_speed_test
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
arduino:displays_for_classic_arduinos:nokia_5110_displays_and_classic_arduinos_speed_test [2018/01/28 05:36] – [Tests] mithat | arduino:displays_for_classic_arduinos:nokia_5110_displays_and_classic_arduinos_speed_test [2018/01/28 06:22] – mithat | ||
---|---|---|---|
Line 3: | Line 3: | ||
===== Summary evaluation ===== | ===== Summary evaluation ===== | ||
- | One might expect | + | For general information on this display, |
- | character change artifacts are not objectionable. The frame update time is expected to halve with a 16 MHz board, but there are no 16 MHz 3.3V boards, so that means you'll have to complicate things a bit with level shifters. | + | |
- | The bad news is that it's still a bit of a memory glutton, consuming 42% of program storage and 24% of dynamic memory. Most of that is probably the data for the lovely fonts. Lunches are never free. | + | One might expect this 84×48 display with 1 bit color depth to be updateable pretty quickly even with a torpid Uno/ |
===== Tests ===== | ===== Tests ===== | ||
I used [[https:// | I used [[https:// | ||
+ | |||
+ | The frame update time of 100 ms (the inverse of the fps noted in the [[display_nokia_5110_u8g2_counter.ino | source code]]) is respectable, | ||
+ | character change artifacts are not objectionable. The frame update time is expected to halve with a 16 MHz board, but there are no 16 MHz 3.3V boards, so that means you'll have to complicate things a bit with level shifters. Memory use is 42% of program storage and 24% of dynamic memory. | ||
The glare on the edges is an artifact from the four LEDs used to backlight the display. In real life the arifact doesn' appear as glare, but it is clear on inspection that there are four sources of illumination. | The glare on the edges is an artifact from the four LEDs used to backlight the display. In real life the arifact doesn' appear as glare, but it is clear on inspection that there are four sources of illumination. | ||
- | FIXME video | + | {{youtube> |
[[display_nokia_5110_u8g2_counter.ino | source code]] | [[display_nokia_5110_u8g2_counter.ino | source code]] | ||
arduino/displays_for_classic_arduinos/nokia_5110_displays_and_classic_arduinos_speed_test.txt · Last modified: 2018/02/01 20:06 by mithat