Mithat Konar (the wiki)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== k2m051.ino changes ======

I am using a function derived from a function in HiFiDUINO's [[https://hifiduino.wordpress.com/code/|k2m051.ino]] in a proprietary contract project. The [[https://creativecommons.org/licenses/by/3.0/|CC-by 3.0]] license wants me to share modifications, and I am happy to oblige!

Here's the (trivially) modified version of ''unsigned long sampleRate()'' that I am using as a class member function:

<code cpp>
unsigned long ES9018K2M::getSampleRate()
{
    if (!isSignalLock())
    {
        return 0;
    }
//    uint8_t dpll0 = 0;  // LSB of DPLL register
//    uint8_t dpll1 = 0;
//    uint8_t dpll2 = 0;
//    uint8_t dpll3 = 0;  // MSB of DPLL register

    dpll0 = 0;
    dpll1 = 0;
    dpll2 = 0;
    dpll3 = 0;

    m_dpllVal = 0;
    // Read the 4 registers of DPLL one byte at a time starting with LSB (reg 66).
    dpll0 = readRegister(66);
    dpll1 = readRegister(67);
    dpll2 = readRegister(68);
    dpll3 = readRegister(69);

    m_dpllVal |= dpll3;
    m_dpllVal <<= 8;
    m_dpllVal |= dpll2;
    m_dpllVal <<= 8;
    m_dpllVal |= dpll1;
    m_dpllVal <<= 8;
    m_dpllVal |= dpll0;
    m_dpllVal >>= 1;     // Get rid of LSB to allow for integer operation below to avoid overflow.

    //using 80MHZ clock
    m_dpllVal *= 16;     // Calculate SR for 80MHz part
    m_dpllVal /= 859;    // Calculate SR for 80MHz part
    m_dpllVal += 1;
    m_dpllVal *= 2;

    return m_dpllVal;
}
</code>

and my ''isSignalLock()'' function:

<code cpp>
uint8_t ES9018K2M::isSignalLock()
{
    uint8_t regVal = readRegister(REG_64);
    return 0x01 & regVal;   // mask off all but last bit
}
</code>