# An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter. # Files and directories ####################################################### # # This setting controls the top directory which MPD will search to discover the # available audio files and add them to the daemon's online database. This # setting defaults to the XDG directory, otherwise the music directory will be # be disabled and audio files will only be accepted over ipc socket (using # file:// protocol) or streaming files over an accepted protocol. # ###music_directory "/media/mithat/0737-51001/Music" music_directory "/media/mithat/0737-51001/Music/Testfiles-DSD" # # This setting sets the MPD internal playlist directory. The purpose of this # directory is storage for playlists created by MPD. The server will use # playlist files not created by the server but only if they are in the MPD # format. This setting defaults to playlist saving being disabled. # ###playlist_directory "~/.mpd/playlists" playlist_directory "/media/mithat/0737-51001/Music/Playlists" # # This setting sets the location of the MPD database. This file is used to # load the database at server start up and store the database while the # server is not up. This setting defaults to disabled which will allow # MPD to accept files over ipc socket (using file:// protocol) or streaming # files over an accepted protocol. # db_file "~/.mpd/tag_cache" # # These settings are the locations for the daemon log files for the daemon. # These logs are great for troubleshooting, depending on your log_level # settings. # # The special value "syslog" makes MPD use the local syslog daemon. This # setting defaults to logging to syslog, or to journal if mpd was started as # a systemd service. # log_file "~/.mpd/mpd.log" # # This setting sets the location of the file which stores the process ID # for use of mpd --kill and some init scripts. This setting is disabled by # default and the pid file will not be stored. # pid_file "~/.mpd/pid" # # This setting sets the location of the file which contains information about # most variables to get MPD back into the same general shape it was in before # it was brought down. This setting is disabled by default and the server # state will be reset on server start up. # state_file "~/.mpd/state" # # The location of the sticker database. This is a database which # manages dynamic information attached to songs. # sticker_file "~/.mpd/sticker.sql" # ############################################################################### # General music daemon options ################################################ # # This setting specifies the user that MPD will run as. MPD should never run as # root and you may use this setting to make MPD change its user ID after # initialization. This setting is disabled by default and MPD is run as the # current user. # ###user "mpd" # # This setting specifies the group that MPD will run as. If not specified # primary group of user specified with "user" setting will be used (if set). # This is useful if MPD needs to be a member of group such as "audio" to # have permission to use sound card. # #group "nogroup" # # This setting sets the address for the daemon to listen on. Careful attention # should be paid if this is assigned to anything other then the default, any. # This setting can deny access to control of the daemon. Choose any if you want # to have mpd listen on every address. Not effective if systemd socket # activation is in use. # # For network #bind_to_address "localhost" bind_to_address "any" # # And for Unix Socket #bind_to_address "/run/mpd/socket" # # This setting is the TCP port that is desired for the daemon to get assigned # to. # port "64600" # # This setting controls the type of information which is logged. Available # setting arguments are "default", "secure" or "verbose". The "verbose" setting # argument is recommended for troubleshooting, though can quickly stretch # available resources on limited hardware storage. # #log_level "default" ###log_level "verbose" # # Setting "restore_paused" to "yes" puts MPD into pause mode instead # of starting playback after startup. # #restore_paused "no" # # This setting enables MPD to create playlists in a format usable by other # music players. # #save_absolute_paths_in_playlists "no" # # This setting defines a list of tag types that will be extracted during the # audio file discovery process. The complete list of possible values can be # found in the user manual. #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" # # This example just enables the "comment" tag without disabling all # the other supported tags: #metadata_to_use "+comment" # # This setting enables automatic update of MPD's database when files in # music_directory are changed. # #auto_update "yes" # # Limit the depth of the directories being watched, 0 means only watch # the music directory itself. There is no limit by default. # #auto_update_depth "3" # ############################################################################### # Symbolic link behavior ###################################################### # # If this setting is set to "yes", MPD will discover audio files by following # symbolic links outside of the configured music_directory. # #follow_outside_symlinks "yes" # # If this setting is set to "yes", MPD will discover audio files by following # symbolic links inside of the configured music_directory. # #follow_inside_symlinks "yes" # ############################################################################### # Zeroconf / Avahi Service Discovery ########################################## # # If this setting is set to "yes", service information will be published with # Zeroconf / Avahi. # #zeroconf_enabled "yes" # # The argument to this setting will be the Zeroconf / Avahi unique name for # this MPD server on the network. %h will be replaced with the hostname. # zeroconf_name "MPD (mfk) @ %h" # ############################################################################### # Permissions ################################################################# # # If this setting is set, MPD will require password authorization. The password # setting can be specified multiple times for different password profiles. # #password "password@read,add,control,admin" # # This setting specifies the permissions a user has who has not yet logged in. # #default_permissions "read,add,control,admin" # ############################################################################### # Database ####################################################################### # #database { # plugin "proxy" # host "other.mpd.host" # port "6600" #} # Input ####################################################################### # input { plugin "curl" # proxy "proxy.isp.com:8080" # proxy_user "user" # proxy_password "password" } # QOBUZ input plugin input { enabled "no" plugin "qobuz" # app_id "ID" # app_secret "SECRET" # username "USERNAME" # password "PASSWORD" # format_id "N" } # TIDAL input plugin input { enabled "no" plugin "tidal" # token "TOKEN" # username "USERNAME" # password "PASSWORD" # audioquality "Q" } # Decoder ##################################################################### # decoder { plugin "hybrid_dsd" enabled "no" # enabled "yes" # gapless "no" } decoder { plugin "wildmidi" enabled "no" #config_file "/etc/timidity/timidity.cfg" } ############################################################################### # Audio Output ################################################################ # # MPD supports various audio output types, as well as playing through multiple # audio outputs at the same time, through multiple audio_output settings # blocks. Setting this block is optional, though the server will only attempt # autodetection for one sound card. # # See for documentation. # # An example of an ALSA output: # #audio_output { # type "alsa" # name "Alsa sound card" #} ##audio_output { ## type "alsa" ## name "Sound Card w/ dmixer" ## options "dev=dmixer" ##} ### audio_output { ### type "alsa" ### name "My ALSA Device" ### #device "hw:0,0" # optional ### #format "44100:16:2" # optional ### #mixer_device "default" # optional ### mixer_control "Master" # optional ### #mixer_index "0" # optional #} ### ### mfk for bitperfect and manual ### audio_output { type "pulse" name "MPD PulseAudio Output" mixer_type "software" # sink "your-sink-name-here" } #audio_output { # type "alsa" # name "Laptop audio" # device "hw:0,0" # mixer_type "software" # replay_gain_handler "software" #} audio_output { type "alsa" name "USB audio (BITPERFECT)" device "hw:2,0" # mixer_type "hardware" mixer_type "none" # mixer_type "null" replay_gain_handler "none" dsd_usb "yes" # dop "no" dop "yes" auto_resample "no" # auto_resample "yes" } ### mfk USB w/volume control audio_output { type "alsa" name "USB audio (s/w volume)" device "hw:2,0" # mixer_type "software" # mixer_control "pcm" replay_gain_handler "none" dsd_usb "no" dop "no" auto_resample "yes" } # An example of an OSS output: # #audio_output { # type "oss" # name "My OSS Device" # device "/dev/dsp" # optional # mixer_type "hardware" # optional # mixer_device "/dev/mixer" # optional # mixer_control "PCM" # optional #} # # An example of a shout output (for streaming to Icecast): # #audio_output { # type "shout" # encoder "vorbis" # optional # name "My Shout Stream" # host "localhost" # port "8000" # mount "/mpd.ogg" # password "hackme" # quality "5.0" # bitrate "128" # format "44100:16:1" # protocol "icecast2" # optional # user "source" # optional # description "My Stream Description" # optional # url "http://example.com" # optional # genre "jazz" # optional # public "no" # optional # timeout "2" # optional # mixer_type "software" # optional #} # # An example of a recorder output: # #audio_output { # type "recorder" # name "My recorder" # encoder "vorbis" # optional, vorbis or lame # path "/var/lib/mpd/recorder/mpd.ogg" ## quality "5.0" # do not define if bitrate is defined # bitrate "128" # do not define if quality is defined # format "44100:16:1" #} # # An example of a httpd output (built-in HTTP streaming server): # #audio_output { # type "httpd" # name "My HTTP Stream" # encoder "vorbis" # optional, vorbis or lame # port "8000" # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 # quality "5.0" # do not define if bitrate is defined # bitrate "128" # do not define if quality is defined # format "44100:16:1" # max_clients "0" # optional 0=no limit #} # # An example of a pulseaudio output (streaming to a remote pulseaudio server) # Please see README.Debian if you want mpd to play through the pulseaudio # daemon started as part of your graphical desktop session! # #audio_output { # type "pulse" # name "My Pulse Output" # server "remote_server" # optional # sink "remote_server_sink" # optional #} # # An example of a winmm output (Windows multimedia API). # #audio_output { # type "winmm" # name "My WinMM output" # device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional # or # device "0" # optional # mixer_type "hardware" # optional #} # # An example of an openal output. # #audio_output { # type "openal" # name "My OpenAL output" # device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional #} # ## Example "pipe" output: # #audio_output { # type "pipe" # name "my pipe" # command "aplay -f cd 2>/dev/null" ## Or if you're want to use AudioCompress # command "AudioCompress -m | aplay -f cd 2>/dev/null" ## Or to send raw PCM stream through PCM: # command "nc example.org 8765" # format "44100:16:2" #} # ## An example of a null output (for no audio output): # #audio_output { # type "null" # name "My Null Output" # mixer_type "none" # optional #} # # This setting will change all decoded audio to be converted to the specified # format before being passed to the audio outputs. By default, this setting is # disabled. # #audio_output_format "44100:16:2" # # If MPD has been compiled with libsamplerate support, this setting specifies # the sample rate converter to use. Possible values can be found in the # mpd.conf man page or the libsamplerate documentation. By default, this is # setting is disabled. # #samplerate_converter "Fastest Sinc Interpolator" samplerate_converter "Best Sinc Interpolator" # ############################################################################### # Volume control mixer ######################################################## # # These are the global volume control settings. By default, this setting will # be detected to the available audio output device, with preference going to # hardware mixing. Hardware and software mixers for individual audio_output # sections cannot yet be mixed. # # An example for controlling an ALSA, OSS or Pulseaudio mixer; If this # setting is used other sound applications will be affected by the volume # being controlled by MPD. # #mixer_type "hardware" # # An example for controlling all mixers through software. This will control # all controls, even if the mixer is not supported by the device and will not # affect any other sound producing applications. # #mixer_type "software" # # This example will not allow MPD to touch the mixer at all and will disable # all volume controls. # #mixer_type "disabled" # ############################################################################### # Normalization automatic volume adjustments ################################## # # This setting specifies the type of ReplayGain to use. This setting can have # the argument "album" or "track". See for more # details. This setting is disabled by default. # #replaygain "album" # # This setting sets the pre-amp used for files that have ReplayGain tags. By # default this setting is disabled. # #replaygain_preamp "0" # # This setting enables on-the-fly normalization volume adjustment. This will # result in the volume of all playing audio to be adjusted so the output has # equal "loudness". This setting is disabled by default. # #volume_normalization "no" # ############################################################################### # MPD Internal Buffering ###################################################### # # This setting adjusts the size of internal decoded audio buffering. Changing # this may have undesired effects. Don't change this if you don't know what you # are doing. # #audio_buffer_size "2048" # # This setting controls the percentage of the buffer which is filled before # beginning to play. Increasing this reduces the chance of audio file skipping, # at the cost of increased time prior to audio playback. # #buffer_before_play "10%" # ############################################################################### # Resource Limitations ######################################################## # # These settings are various limitations to prevent MPD from using too many # resources. Generally, these settings should be minimized to prevent security # risks, depending on the operating resources. # #connection_timeout "60" #max_connections "10" #max_playlist_length "16384" #max_command_list_size "2048" #max_output_buffer_size "8192" # ############################################################################### # Character Encoding ########################################################## # # If file or directory names do not display correctly for your locale then you # may need to modify this setting. # filesystem_charset "UTF-8" # # This setting controls the encoding that ID3v1 tags should be converted from. # ###id3v1_encoding "UTF-8" # ############################################################################### # SIDPlay decoder ############################################################# # # songlength_database: # Location of your songlengths file, as distributed with the HVSC. # The sidplay plugin checks this for matching MD5 fingerprints. # See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq # # default_songlength: # This is the default playing time in seconds for songs not in the # songlength database, or in case you're not using a database. # A value of 0 means play indefinitely. # # filter: # Turns the SID filter emulation on or off. # #decoder { # plugin "sidplay" # songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" # default_songlength "120" # filter "true" #} # ###############################################################################