Differences

This shows you the differences between two versions of the page.

--- arduino:stm32_blue_pill [2021/07/02 18:58] – [Hardware] mithat
+++ arduino:stm32_blue_pill [2022/06/26 01:18] (current) – [STM32 "Blue Pill"] mithat
@@ Line 3: / Line 3: @@
 Some quick notes about setting up a STM32F103C8T6 [[https://wiki.stm32duino.com/index.php?title=Blue_Pill|"Blue Pill"]] for development on Arduino.((I got mine from https://www.ebay.com/itm/STM32F103C8T6-ARM-STM32-Minimum-System-Development-Board-Module-for-Arduino-US/191896085961))
-<WRAP center round important 60%>
+<WRAP center round info 60%>
 This page describes the process for settings things up with the [[https://github.com/rogerclarkmelbourne/Arduino_STM32|Arduino_STM32]] tools originally developed by Roger Clarke. **These tools are now effectively unsupported**.
@@ Line 31: / Line 31: @@
   * Connect the serial converter's RX to the Blue Pill's ''A9''.
   * Connect the serial converter's TX to the Blue Pill's ''A10''.
-  * If you will be powering the Blue Pill from the serial converter board, connect VCC from the serial converter board to the ''3.3'' pin of the Blue Pill (or ''5V'' if your serial converter board only puts out 5V VCC).
+  * If you will be powering the Blue Pill from the serial converter board, connect VCC from the serial converter board to the ''3.3'' pin of the Blue Pill if your serial converter board provides a 3.3V VCC output or the ''5V'' pin if your serial converter board only puts out 5V VCC.
 ==== Arduino environment ====