Mithat Konar (the wiki)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<file c++ display_character_20x4_counter.ino>
/*
   display_character_20x4_counter.ino
   Mithat Konar

   Test screen update speed with "BIG" fonts on a
   20x4 character display using a parallel interface.

   Notes:
   Consumes 15% of program storage space and
   4% of dynamic memory on a Nano.   

   Render time with a 16 MHz processor is around
   14 msec, independent of LOOP_DELAY but dependent on
   the number of characters being drawn.
*/

/*
   Pin assignments (unlisted pins are note connected):
   VSS: ground
   VDD: 5VDC
   V0: wiper of contrast potentiometer
   RS: 12
   RW: pullup to Vcc
   EN: 11
   D4: 5
   D5: 4
   D6: 3
   D7: 2
   LED cathode: 5VDC through dropping resistor (47 ohm).
   LED anode : ground
*/

#include <BigCrystal.h>
#include <LiquidCrystal.h>

const unsigned int RS_PIN = 12,
                   ENABLE_PIN = 11,
                   D4_PIN = 5,
                   D5_PIN = 4,
                   D6_PIN = 3,
                   D7_PIN = 2;

LiquidCrystal lcd(RS_PIN, ENABLE_PIN, D4_PIN, D5_PIN, D6_PIN, D7_PIN);
BigCrystal bigCrystal(&lcd);

unsigned int now, then = 0;  // used to track time
unsigned counter  = 80;
char dispStr[4];             // null terminated char array used to pass to renderer.
const unsigned int LOOP_DELAY = 500; // msec of additional loop delay

void setup(void) {
  bigCrystal.begin(20, 4);
  bigCrystal.print(F("20x4 char (parallel)"));

  // print legend(s)
  bigCrystal.setCursor(0, 1);
  bigCrystal.print(F("Render time:"));
}

void loop(void) {
  then = now;
  now = millis();

  // print render time 
  bigCrystal.setCursor(13, 1);      // clear the old data
  bigCrystal.print("   ");
  bigCrystal.setCursor(13, 1);      // print new data
  bigCrystal.print(now - then - LOOP_DELAY);
  bigCrystal.setCursor(16, 1);      // print units
  bigCrystal.print(F("msec"));

  // print a big counter
  counter = (counter + 1 ) % 1000;
  String(counter).toCharArray(dispStr, 4);
  bigCrystal.printBig(dispStr, 0, 2);

  delay(LOOP_DELAY);
}
</file>