Differences

This shows you the differences between two versions of the page.

--- arduino:configuring_netbeans_for_arduino_development [2018/08/24 16:12] – mithat
+++ arduino:configuring_netbeans_for_arduino_development [2024/02/05 19:06] (current) – mithat
@@ Line 1: / Line 1: @@
 ====== Configuring Netbeans for Arduino Development ======
-My current favorite tool for developing non-trivial Arduino projects is Netbeans with C++ support. This documents my setup. It has been vetted with NetBeans 8.2.
+My current favorite tool for developing non-trivial Arduino projects is [[https://netbeans.apache.org/|Netbeans]] with C++ support. Netbeans is a great candidate for Arduino programming because it allows you to define specific tool collections for projects and it uses standard Makefiles to manage the build. So all you really need to do once you have Netbeans working for writing C++ projects is add a tool collection for Arduino and create an appropriate Makefile. This documents my setup and has been vetted with NetBeans 8.2.
 ===== The tool collection =====
-NetBeans will want to know where the build tools for your project live so code completion and other things work correctly. Set up a new tool collection for Arduino along the lines of the figure below:
+NetBeans will be happiest if you let it know where the build tools for your project live. Set up a new tool collection for Arduino along the lines of the figure below:
 {{:arduino:arduino-avr-tool-collection.png?direct&300|}}
-If you are using something other than an Arduinos with AVR microcontrollers, the paths will need to be adjusted.
+If you are using an Arduino that uses something other than an AVR microcontroller, the paths will need to be adjusted.
 ===== The Makefile and config =====
-I use either [[https://github.com/sudar/Arduino-Makefile|Arduino-Makefile]] or my own [[https://github.com/mithat/arduino-build | Arduino-Build]] to do the actual building. I won't cover using either of those here as they are their own things. However, you can use the following as a cheatsheet for setting things up.
+I use my own [[https://github.com/mithat/arduino-build | Arduino-Build]] to do the actual building. I used to use [[https://github.com/sudar/Arduino-Makefile|Arduino-Makefile]], so you may prefer this if it works for your project. I won't cover either of those in any depth here as they are each their own thing. However, you can use the following as a cheatsheet for setting things up.
-==== Arduino-Makefile ====
-When creating a new project with Arduino-Makefile, your local project Makefile should look something like the following:
-<file make Makefile>
-# Project config
-ARDUINO_LIBS = SoftwareWire AsyncTimer
-BOARD_TAG = pro
-BOARD_SUB = 16MHzatmega328
-MONITOR_PORT = /dev/ttyUSB0
-MONITOR_CMD = screen-wrap
-# "Platform" config
-ARDUINO_QUIET = true
-ARDUINO_SKETCHBOOK = $(HOME)/Arduino
-ARDUINO_DIR = $(HOME)/opt/arduino
-ARDMK_DIR = $(HOME)/Build/Arduino-Makefile
-# Include parent Makefile from <https://github.com/sudar/Arduino-Makefile>
-include $(HOME)/Build/Arduino-Makefile/Arduino.mk
-</file>
 ==== Arduino-Build ====
@@ Line 41: / Line 19: @@
 <file make Makefile>
-# Point BB at the arduino-build.sh script
+# Point BB at the arduino-build script
-BB=<your-path-to>/arduino-build.sh
+BB=/your/path/to/arduino-build
 # You shouldn't have to change any of these.
@@ Line 62: / Line 40: @@
 </file>
-You will also need an ''arduino.conf'' file in the root of your project that looks like:
+You will also need an ''arduino.conf'' file in the root of your project that's similar to:
-<file conf arduino.conf>
+<file bash arduino.conf>
 # === Arduino path ===
 ARDUINO_PATH=/home/mithat/opt/arduino
@@ Line 79: / Line 57: @@
 </file>
-See the Arduino-Build readme for information on figuring out the board parameters and other fiddly bits.
+Consult the Arduino-Build readme for information on figuring out the board parameters and other fiddly bits.
+==== Arduino-Makefile ====
+When creating a new project with Arduino-Makefile, your local project Makefile should look something like the following:
+<file make Makefile>
+# Project config
+ARDUINO_LIBS = SoftwareWire AsyncTimer
+BOARD_TAG = pro
+BOARD_SUB = 16MHzatmega328
+MONITOR_PORT = /dev/ttyUSB0
+MONITOR_CMD = screen-wrap
+# "Platform" config
+ARDUINO_QUIET = true
+ARDUINO_SKETCHBOOK = $(HOME)/Arduino
+ARDUINO_DIR = $(HOME)/opt/arduino
+ARDMK_DIR = $(HOME)/Build/Arduino-Makefile
+# Include parent Makefile from <https://github.com/sudar/Arduino-Makefile>
+include $(HOME)/Build/Arduino-Makefile/Arduino.mk
+</file>
 ===== Code completion =====
-While your setup should be working now, NB will be shouting at you a lot about things not being defined, etc. That's because you need to add [[arduino:code_completion|code completion directories]] to the tool collection. Do this on the //Code Completion > C++// tab of the tool collection dialog.
+While your setup should be working now, NetBeans will be shouting at you a lot about things not being defined, etc. That's because you need to add [[arduino:code_completion|code completion directories]] to the tool collection. Do this on the //Code Completion > C++// tab of the tool collection dialog.