User Tools

Site Tools


arduino:arduino_without_a_bootloader

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
arduino:arduino_without_a_bootloader [2020/01/04 02:29] – [Case 1: Uno or Nano with USBtinyISP] mithatarduino:arduino_without_a_bootloader [2020/01/04 02:46] – [Getting your bootloader back] mithat
Line 186: Line 186:
 When you upload a program using a programmer, you overwrite the bootloader. This means your board will no longer work with the conventional //Sketch > Upload// command in the IDE. However, getting the bootloader back is straightforward. When you upload a program using a programmer, you overwrite the bootloader. This means your board will no longer work with the conventional //Sketch > Upload// command in the IDE. However, getting the bootloader back is straightforward.
  
-Uploading a bootloader to your micro is almost identical to uploading a program using a programmer. The only difference is that instead of uploading a program using //Sketch > Upload Using Programmer//, you upload the appropriate bootloader for your board using //Tools > Burn Bootloader//. As was the case when uploading programs, before you upload the bootloader, you must confirm that //Tools > Board// and //Tools > Processor// fields are set appropriately for your board.+Uploading a bootloader to your micro is almost identical to uploading a program using a programmer. The only difference is that instead of uploading a program using //Sketch > Upload Using Programmer//, you upload the appropriate bootloader for your board using //Tools > Burn Bootloader//. As was the case when uploading programs, before you upload the bootloader, you must confirm that //Tools > Board// and //Tools > Processor// or other options are set appropriately for your board.
  
 After uploading the bootloader, you should be able to use //Sketch > Upload// again just as you always have. After uploading the bootloader, you should be able to use //Sketch > Upload// again just as you always have.
  
arduino/arduino_without_a_bootloader.txt · Last modified: 2022/05/30 05:46 by mithat

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki