Mithat Konar (the wiki)

User Tools

Site Tools

You are here: Mithat Konar (the wiki) » Arduino stuff » Crash Course in Arduino Programming » Basic Interaction
arduino:arduino_crash_course:basic_interaction

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
arduino:arduino_crash_course:basic_interaction [2012/11/03 21:12] – [Polling versus interrupts] mithatarduino:arduino_crash_course:basic_interaction [2012/11/05 22:13] – mithat
Line 29: Line 29:
 int pushButtonPin = 2;  // connect the push button to digital pin 2 int pushButtonPin = 2;  // connect the push button to digital pin 2
 int ledPin = 13;        // connect the LED to pin 13 int ledPin = 13;        // connect the LED to pin 13
 +int buttonState;        // stores current button state 
  
 void setup() { void setup() {
Line 36: Line 37:
  
 void loop() { void loop() {
-  int buttonState = digitalRead(pushButtonPin);  // read the input pin+  buttonState = digitalRead(pushButtonPin);  // read the input pin
  
     // set LED state accordingly     // set LED state accordingly
Line 61: Line 62:
 int pushButtonPin = 2;  // connect the push button to digital pin 2 int pushButtonPin = 2;  // connect the push button to digital pin 2
 int ledPin = 13;        // connect the LED to pin 13 int ledPin = 13;        // connect the LED to pin 13
 +int buttonState;        // stores current button state 
  
 void setup() { void setup() {
Line 68: Line 70:
  
 void loop() { void loop() {
-  int buttonState = digitalRead(pushButtonPin);  // read the input pin+  buttonState = digitalRead(pushButtonPin);  // read the input pin
   digitalWrite(ledPin, buttonState);             // turn the LED on or off   digitalWrite(ledPin, buttonState);             // turn the LED on or off
   //delay(1);        // delay in between reads for stability (?)   //delay(1);        // delay in between reads for stability (?)
Line 85: Line 87:
 int pushButtonPin = 2;  // connect the push button to digital pin 2 int pushButtonPin = 2;  // connect the push button to digital pin 2
 int ledPin = 13;        // connect the LED to pin 13 int ledPin = 13;        // connect the LED to pin 13
 +int buttonState;        // stores current button state 
  
 void setup() { void setup() {
Line 117: Line 120:
 int pushButtonPin = 2;  // connect the push button to digital pin 2 int pushButtonPin = 2;  // connect the push button to digital pin 2
 int ledPin = 13;        // connect the LED to pin 13 int ledPin = 13;        // connect the LED to pin 13
 +int buttonState;        // stores current button state 
  
 void setup() { void setup() {
Line 125: Line 129:
  
 void loop() { void loop() {
-  int buttonState = digitalRead(pushButtonPin);  // read the input pin+  buttonState = digitalRead(pushButtonPin);  // read the input pin
  
   // set LED state accordingly   // set LED state accordingly
Line 145: Line 149:
 int pushButtonPin = 2;  // connect the push button to digital pin 2 int pushButtonPin = 2;  // connect the push button to digital pin 2
 int ledPin = 13;        // connect the LED to pin 13 int ledPin = 13;        // connect the LED to pin 13
 +int buttonState;        // stores current button state 
  
 void setup() { void setup() {
Line 153: Line 158:
  
 void loop() { void loop() {
-  int buttonState = !digitalRead(pushButtonPin);  // read the input pin+  buttonState = !digitalRead(pushButtonPin);  // read the input pin
   digitalWrite(ledPin, buttonState);              // turn the LED on or off   digitalWrite(ledPin, buttonState);              // turn the LED on or off
 } }
 </file> </file>
arduino/arduino_crash_course/basic_interaction.txt · Last modified: 2017/12/06 01:05 by mithat
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki