Differences

This shows you the differences between two versions of the page.

--- arduino:code_completion [2016/04/20 15:44] – mithat
+++ arduino:code_completion [2017/04/22 01:30] (current) – [Directories to include by default] mithat
@@ Line 1: / Line 1: @@
 ====== Arduino Code Completion Directories ======
 ===== The directories =====
 ==== How to use these lists ====
@@ Line 11: / Line 10: @@
 ==== Directories to include by default ====
-The following is a list of known directories to add to your IDE for effective code completion using AVR-based Arduinos (version 1.6.5).
+The following is a list of known directories to add to your IDE for effective code completion using AVR-based Arduinos (version 1.6.*).
 <code>
 {path-to-arduino}/hardware/arduino/avr/cores/arduino/
 {path-to-arduino}/hardware/arduino/avr/libraries/EEPROM/
+{path-to-arduino}/hardware/arduino/avr/libraries/HID/
 {path-to-arduino}/hardware/arduino/avr/libraries/SPI/
 {path-to-arduino}/hardware/arduino/avr/libraries/SoftwareSerial/
@@ Line 23: / Line 23: @@
 {path-to-arduino}/hardware/tools/avr/avr/include/compat/
 {path-to-arduino}/hardware/tools/avr/avr/include/util/
-{path-to-arduino}/hardware/tools/avr/lib/gcc/avr/4.8.1/include/
+{path-to-arduino}/hardware/tools/avr/lib/gcc/avr/4.*.*/include/
-{path-to-arduino}/hardware/tools/avr/lib/gcc/avr/4.8.1/include-fixed/
+{path-to-arduino}/hardware/tools/avr/lib/gcc/avr/4.*.*/include-fixed/
 </code>
@@ Line 53: / Line 53: @@
 ==== Including third-party libraries ====
-In addition to the above, you should add any libraries you've downloaded into your `{Arduino-install-directory}/libraries` and used by your project to the IDE project's list of additional directories for code completion. These will typically be of the form:
+In addition to the above, you should add any libraries you've downloaded into your ''{Arduino-install-directory}/libraries'' and used by your project to the IDE project's list of additional directories for code completion. These will typically be of the form:
 <code>
 ../libraries/{name-of-library}
 </code>